A dive watch requires be maintaining in a proper manner so that it can aid you in keeping you safe and protecting in the water. Simply by having a few extra minutes just before and after you dive you can actually add many years to your watch’s life.

Alongside safety, one more logical reason behind taking care of your dive watch is that a lot of these watches are worth more than thousands of dollars.

Firstly, after you make one dive, to remove any trace of saline water you must rinse it out with fresh and clean water. Also if you go for swimming, ensure that you rinse the watch equally well, as chlorine can be simply be as bad as the salt water on the metals and the gaskets.

Secondly, in order to ensure that dirt, sand or grit doesn’t get stuck right under the dial the bezel should be turned. This also aids in making sure that the salt water is well rinsed away.

Thirdly, you should thoroughly check the gaskets. Rubber seals are there which makes watch water resistant, so they are of enormous importance. If you plan making a lot of dives then you should replace them or make an inspection at least once a year. However, majority of the manufacturers recommend for changing the gaskets at least once in every 2 to 3 year.

Fourthly, hot tubs and the saunas are the places from which you must keep away your dive watch from. Rapid changes in temperature can cause damages to your watch, so simply take your watch off just before you make a visit into these tubs.

Finally, if you are having a screw down crown then ensure that it is well screwed all the way much before diving. This will aid you in insuring a waterproof seal.

If you adhere to these simple procedures, then easily your dive watch should be having a long life ahead. But remember, that this particular watch aids you in keeping you safe and protected in water therefore treat it with due respect.